hua
XDB606-S1 Series Intelligent Single Flange Level Transmitter
Ngā āhuatanga
1. Tika Teitei: Te tika o te tohutoro o 0.075% mo nga tukanga whakatikatika paerewa.
2. Mahinga Whakanuia Rawa: Ka taea te tu atu ki te 16MPa o te taumahatanga i runga i nga awhe iti.
3. He Pai Te Urutau Taiao: He whakaatu i te pehanga pateko mohio me te utu o te pāmahana, te whakaiti i nga hapa ine na te pāmahana, te pehanga pateko, me nga awe o te taumahatanga.
4. He pai ake te whakahaere me te waatea: Kua whakauruhia ki te whakaaturanga LCD backlit 5-mati e tuku ana i nga momo mahi (tirohia nga tuhipoka whiriwhiri), he mahinga tere e toru-patene mo nga whakarereketanga o te rohe.
5. Nga Taonga Atete-Waikura: E waatea ana i roto i nga momo momo taonga aukati.
6. Nga Mahi Whaiaro-Whakaahua Matawhānui: Ka whakarite i te mahi pono me te riterite.
Nga tono angamaheni
1. Te Ahumahi Hinu/Petrochemical/Matū: Kua honoa ki nga taputapu tarai mo te inenga me te whakahaere tika. Te ine tika i te paipa me te pehanga taika rokiroki me te taumata wai.
2. Te Hiko / Te Hau Taone / Ētahi atu: E hiahia ana ki te pumau me te tino tika mo te pehanga, te rere, me te ine taumata.
3. Ahumahi Pupa me te Pepa: Mo te pehanga, te rere, me te inenga taumata i roto i nga taiao e hiahia ana ki te atete ki te wai matū me te wai pirau.
4. Te maitai/Kore-ferrous Metals/Ceramics: Whakamahia mo te pehanga oumu me te inenga korehau, e hiahia ana ki te pumau me te tika.
5. Taputapu Miihini/Hanga Kaipuke: Ka whakamahia i roto i nga waahi he mea nui te inenga o te pehanga, te rere, me te taumata wai i raro i nga tikanga tino whakahaere.
Tawhā
| Awhe pehanga | -30~30bar | Momo pehanga | Te pehanga ine me te pehanga tino |
| Tika | ± 0.2%FS | ngaohiko whakauru | 10.5~45V DC (haumaru tino pahū-aru 10.5-26V DC) |
| Tohu putanga | 4~20mA me Hart | Whakaatu | LCD |
| Pānga mana | ± 0.005%FS/1V | Te pāmahana taiao | -40~85 ℃ |
| Nga taonga whare | Maka konumohe koranu me kowiri tira (he kōwhiringa) | Momo pūoko | Monocrystalline silicon |
| Rauemi Diaphragm | SUS316L, Hastelloy HC-276, Tantalum, whakakikoruatia ki te koura, Monel, PTFE (he kōwhiringa) | Te whiwhi rauemi wai | Kowiri tira |
| Taiao pānga pāmahana | ± 0.095~0.11% URL/10 ℃ | Waenga ine | Hau, mamaoa, wai |
| Te pāmahana waenga | Ka whakawhirinaki ki te flange | Pānga pēhanga pateko | ± 0.1%FS/10MPa |
| Te pumau | ± 0.1%FS/5 tau | Tuhinga o mua | Ex(ia) IIC T6 |
| Te karaehe tiaki | IP66 | Taiapa whakauru | Wao waro piauau me te kowiri maitai (kōwhiringa) |
| Taumaha | ≈6.98kg | ||
Ahu(mm) & hononga hiko
![Whakaahua XDB606-S1series[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image2.jpg)
![Whakaahua XDB606-S1series[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image21.jpg)
![Whakaahua XDB606-S1series[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image22.jpg)
![Whakaahua XDB606-S1series[2]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image24.jpg)
Ānau Huaputa
![Whakaahua raupapa XDB605[3]](http://www.xdbsensor.com/uploads/XDB605-series-Image3.jpg)
Hoahoa whakaurunga hua
![Whakaahua XDB606-S1series[3]](http://www.xdbsensor.com/uploads/XDB606-S1series-Image3.jpg)
| Tepu tapawha DN50 tepu ahu Waeine: mm | |||||||
| Paerewa flange | A | B | C | D | T1 | Te maha o nga tutaki(n） | Te diameter o te poka raka(d) |
| ANSI150 | 150 | 120.7 | 100 | 61 | 19.5 | 4 | 18 |
| ANSI300 | 165 | 127 | 100 | 61 | 22.7 | 8 | 18 |
| ANSI600 | 165 | 127 | 100 | 61 | 32.4 | 8 | 18 |
| ANSI900 | 215 | 165.1 | 100 | 61 | 45.1 | 8 | 26 |
| ANSI1500 | 215 | 165.1 | 100 | 61 | 45.1 | 8 | 26 |
| DINPN10/16 | 165 | 125 | 100 | 61 | 18 | 4 | 18 |
| DINPN25/40 | 165 | 125 | 100 | 61 | 20 | 4 | 18 |
| DIN PN 64 | 180 | 135 | 100 | 61 | 26 | 4 | 22 |
| DIN PN 100 | 195 | 145 | 100 | 61 | 28 | 4 | 26 |
| DIN PN 160 | 195 | 145 | 100 | 61 | 30 | 4 | 26 |
| Papanga papatahi DN80 tepu ahu Waeine: mm | |||||||
| Paerewa flange | A | B | C | D | T1 | Te maha o nga tutaki(n） | Te diameter o te poka raka(d) |
| ANSI150 | 190 | 152.4 | 130 | 89 | 24.3 | 4 | 18 |
| ANSI300 | 210 | 168.3 | 130 | 89 | 29 | 8 | 22 |
| ANSI600 | 210 | 168.3 | 130 | 89 | 38.8 | 8 | 22 |
| ANSI900 | 240 | 190.5 | 130 | 89 | 45.1 | 8 | 26 |
| ANSI1500 | 265 | 203.2 | 130 | 89 | 54.7 | 8 | 33 |
| DINPN10/16 | 200 | 160 | 130 | 89 | 20 | 8 | 18 |
| DINPN25/40 | 200 | 160 | 130 | 89 | 24 | 8 | 18 |
| DIN PN 64 | 215 | 170 | 130 | 89 | 28 | 8 | 22 |
| DIN PN 100 | 230 | 180 | 130 | 89 | 32 | 8 | 26 |
| DIN PN 160 | 230 | 180 | 130 | 89 | 36 | 8 | 26 |
| Tepu papaarahi DN100 Waeine: mm | |||||||
| Paerewa flange | A | B | C | D | T1 | Te maha o nga tutaki(n） | Te diameter o te poka raka(d) |
| ANSI150 | 230 | 190.5 | 150 | 115 | 24.3 | 8 | 18 |
| ANSI300 | 255 | 200 | 150 | 115 | 32.2 | 8 | 22 |
| ANSI600 | 275 | 215.9 | 150 | 115 | 45.1 | 8 | 26 |
| ANSI900 | 290 | 235 | 150 | 115 | 51.5 | 8 | 33 |
| ANSI1500 | 310 | 241.3 | 150 | 115 | 61.0 | 8 | 36 |
| DINPN10/16 | 220 | 180 | 150 | 115 | 20 | 8 | 18 |
| DINPN25/40 | 235 | 190 | 150 | 115 | 24 | 8 | 22 |
| DIN PN 64 | 250 | 200 | 150 | 115 | 30 | 8 | 26 |
| DIN PN 100 | 265 | 210 | 150 | 115 | 36 | 8 | 30 |
| DIN PN 160 | 265 | 210 | 150 | 115 | 40 | 8 | 30 |
| Tepu tapawha DN50 tepu ahu Waeine: mm | |||||||
| Paerewa flange | A | B | C | D | T1 | Te maha o nga tutaki(n） | Te diameter o te poka raka(d) |
| ANSI150 | 150 | 120.7 | 100 | 48 | 19.5 | 4 | 18 |
| ANSI300 | 165 | 127 | 100 | 48 | 22.7 | 8 | 18 |
| ANSI600 | 165 | 127 | 100 | 48 | 32.4 | 8 | 18 |
| ANSI900 | 215 | 165.1 | 100 | 48 | 45.1 | 8 | 26 |
| ANSI1500 | 215 | 165.1 | 100 | * | 45.1 | 8 | 26 |
| DINPN10/16 | 165 | 125 | 100 | 48 | 18 | 4 | 18 |
| DINPN25/40 | 165 | 125 | 100 | 48 | 20 | 4 | 18 |
| DIN PN 64 | 180 | 135 | 100 | 48 | 26 | 4 | 22 |
| DIN PN 100 | 195 | 145 | 100 | 48 | 28 | 4 | 26 |
| DIN PN 160 | 195 | 145 | 100 | 48 | 30 | 4 | 26 |
| Papanga papatahi DN80 tepu ahu Waeine: mm | |||||||
| Paerewa flange | A | B | C | D | T1 | Te maha o nga tutaki(n） | Te diameter o te poka raka(d) |
| ANSI150 | 190 | 152.4 | 130 | 71 | 24.3 | 4 | 18 |
| ANSI300 | 210 | 168.3 | 130 | 71 | 29 | 8 | 22 |
| ANSI600 | 210 | 168.3 | 130 | 71 | 38.8 | 8 | 22 |
| ANSI900 | 240 | 190.5 | 130 | 71 | 45.1 | 8 | 26 |
| ANSI1500 | 265 | 203.2 | 130 | * | 54.7 | 8 | 33 |
| DINPN10/16 | 200 | 160 | 130 | 71 | 20 | 8 | 18 |
| DINPN25/40 | 200 | 160 | 130 | 71 | 24 | 8 | 18 |
| DIN PN 64 | 215 | 170 | 130 | 71 | 28 | 8 | 22 |
| DIN PN 100 | 230 | 180 | 130 | 71 | 32 | 8 | 26 |
| DIN PN 160 | 230 | 180 | 130 | 71 | 36 | 8 | 26 |
| Tepu papaarahi DN100 Waeine: mm | |||||||
| Paerewa flange | A | B | C | D | T1 | Te maha o nga tutaki(n） | Te diameter o te poka raka(d) |
| ANSI150 | 230 | 190.5 | 150 | 96 | 24.3 | 8 | 18 |
| ANSI300 | 255 | 200 | 150 | 96 | 32.2 | 8 | 22 |
| ANSI600 | 275 | 215.9 | 150 | 96 | 45.1 | 8 | 26 |
| ANSI900 | 290 | 235 | 150 | 96 | 51.5 | 8 | 33 |
| ANSI1500 | 310 | 241.3 | 150 | * | 61.0 | 8 | 36 |
| DINPN10/16 | 220 | 180 | 150 | 96 | 20 | 8 | 18 |
| DINPN25/40 | 235 | 190 | 150 | 96 | 24 | 8 | 22 |
| DIN PN 64 | 250 | 200 | 150 | 96 | 30 | 8 | 26 |
| DIN PN 100 | 265 | 210 | 150 | 96 | 36 | 8 | 30 |
| DIN PN 160 | 265 | 210 | 150 | 96 | 40 | 8 | 30 |
Me pehea te ota
Hei tauira XDB606 - S1 - H - R1 - W1 - SS - C1 -G1 -D1 - A - X1 - DY - M20 - M - H - Q
| Tauira/Tuemi | Waehere tohu | Whakaahuatanga |
| XDB606 | S1 | Whakawhiti Taumata Flange Kotahi |
| Tohu putanga | H | 4-20mA, Hart, 2-waea |
| Awhe ine | R1 | 1~6kPa Awhe: -6~6kPa Tepe taumaha: 2MPa |
| R2 | 4~40kPa Awhe: -40~40kPa Tepe taumaha: 7MPa | |
| R3 | 10~100KPa, Awhe: -100~100kPa Tepe taumaha: 7MPa | |
| R4 | 40~400KPa, Awhe: -100~400kPa Tepe taumaha: 7MPa | |
| R5 | 0.3-3MPa, Awhe: -0.1-3MPa Tepe taumaha: 7MPa | |
| Nga taonga whare | W1 | Maka konumohe konumohe |
| W2 | Kowiri tira | |
| Te whiwhi rauemi wai | SS | Diaphragm: SUS316L, Ētahi atu rauemi wai: kowiri tira |
| HC | Diaphragm: Hastelloy HC-276 Ētahi atu rauemi whakapā wai: kowiri tira | |
| TA | Diaphragm: Tantalum Ētahi atu Rawa Whakapā Wai: Kowiri tira | |
| GD | Diaphragm: whakakikoruatia ki te koura, etahi atu rauemi whakapiri wai: kowiri tira | |
| MD | Diaphragm: Monel Ētahi atu rauemi whakapā wai: kowiri tira | |
| PTFE | Diaphragm: paninga PTFE Ētahi atu rauemi whakapā wai: kowiri tira | |
| Te Tukatuka Taha Taarahi Hononga | C1 | 1/4 NPT wahine |
| C2 | 1/2 NPT wahine | |
| Flange Taha Peke-Teitei Whakatakotoranga
| G1 | GB/T9119-2010 (National Standard): 1.6MPa |
| G2 | HG20592 (Paerewa Ahumahi Matū): 1.6MPa | |
| G3 | DIN (Paerewa Tiamana): 1.6MPa | |
| G4 | ANSI (American Standard): 1.6MPa | |
| GX | Whakaritea | |
| Pēhanga Teitei taha Flange Rahi | D1 | DN25 |
| D2 | DN50 | |
| D3 | DN80 | |
| D4 | DN100 | |
| D5 | Whakaritea | |
| Rauemi Flange | A | 304 |
| B | 316 | |
| C | Whakaritea | |
| Te Roa o te Diaphragm Protrusion | X1 | ***mm |
| Te roa o te Capillary | DY | ***mm |
| Hononga hiko | M20 | M20 * 1.5 wahine me te mono matapo me te hono hiko |
| N12 | 1/2NPT wahine me te mono matapo me te hono hiko | |
| Whakaatu | M | Whakaaturanga LCD me nga paatene |
| L | Whakaaturanga LCD kaore he paatene | |
| N | KORE | |
| 2-inihi paipa whakaurunga taiapa | H | Taiapa |
| N | KORE | |
| Rauemi taiapa | Q | waro maitai piauau |
| S | Kowiri tira |
